There’s a fantastic deal of info online regarding what to do when you’re having trouble with your car’s power locks . Typically, removing the inside car door panel is necessary to do the job. Fixing car door issues doesn’t have to be scary; removing the inside car door panel is just part of the process. Here’s a brief summary of WikiHow’s step-by-step take on the process. For this undertaking, you’ll want to have a flathead, Phillips and 12-point screwdriver handy. If you also need an Allen wrench, then you’ve a more complicated door. Keep in mind that this is general info; consult your owner’s guide for specific details regarding your automobile. A web search involving diagrams won’t hurt, either.
Open the door before removing the inside car door panel
You can’t do this job effectively if you do not have room to work. If you don’t have leverage, you have to flex some severe muscle, which would immediately make this a less-than-easy job.
Got a pop-up lock?
In other words, do you have a lock that sticks up out of the inner panel? If it does, you will have to get it out of there before you are able to proceed. Fortunately, they typically unscrew in a simply manner.
Getting a deal with on the handle
The mechanism that opens the car door is next. A fastening screw should be located someplace underneath the handle. After lifting the lever, you should be able to see the screw. After unscrewing, the plastic mounting plate that held the manage should be removable.
Get the armrest now
Under the armrest should be screw holes. You’ll find screws down there, usually. There may be plastic covers over these screws, but they should pop off with a flathead screwdriver. Unscrew and de-armrest. When you have power windows, unplug the attached wires from the door. This is safe and easy in most unmodified cars, as the plug ends are within plastic tabs. Squeeze and pull out.
Take care of manual window cranks
For those who have an older car, the window crank is separate from the armrest procedure; in involves a plastic cap and snap ring, in that case. The flathead screwdriver is again the tool for the job.
Pry it, putty please
The putty knife is a fantastic tool to wedge between the plastic frame for separation. Pry gently, popping the grommets from the cardboard panel underneath. If you break these plastic parts, you’ll have to spend time at your dealer or on eBay tracking them down. You are almost done, but don’t go for total separation until completing the next step.
The window has to go
Shattered glass ready to be stepped on is not desirable, so gently lift the window from its housing slot. Once you’ve accomplished this, pop, pop away. Take care of your repair issues, then follow the above process in reverse order. Do the lock and also the armrest at the end of the process, as they’re essential for holding the whole ball of plastic together. That panel should have some form of adhesive around the outer edge to help it stay in place, instead of hang.
More info on this topic
Additional information at these websites
http://www.wikihow.com/Remove-an-Inside-Door-Panel-from-a-Car
